We are manufacturer and supplier of domestic & Industrial heating elements.
Heating Wire
We are pan India supplier of BRITE Wires. These are best quality heating wires.
Electrical Insulation
We are supplier of raw mica and manufaturer of custom mica products.
BRITE WIRE 25/5A
BRITE WIRE 25/5A
This is high temperature FeCrAL alloy for element temperature up to 1300ºC , it is especially recommended where excellent oxidation and life properties with good stability properties are required. It is used as heating elements in industrial furnace and in domestic and kitchen appliances industry ,typical application in domestic and kitchen appliances are in open coil mica element for toaster ,hair dryer ,zigzag ribbon shaped heating elements in force air heater like hot air gun fan heater dryer etc.
BRITE WIRE 60/16
BRITE WIRE 60/16
This is austenitic NiCr alloy used at element temperature up to 1150ºC. it has excellent hot strength ,good oxidation properties and very good formability also has good corrosion resistance except in Sulphur containing atmospheres and certain controlled atmospheres . It is used in heating element in domestic application in metal sheeted tubular element used in hot plate, Oven Grill, Toaster , Storage Heater etc , and as suspended coils in air heater used in cloth dryer ,fan heater ,hair dryer and in industrial furnace.
BRITE WIRE 80/20
BRITE WIRE 80/20
This is high grade austenitic NiCr alloy which is recommended for use at element temperature up to 1200ºC . It has many advantage due to its excellent properties in the hot state and has superior life compared to all resistance heating alloy because of the extremely good adhesion properties of the surface oxides .Many typical applications are in all types of heating elements of domestic and industrial appliances and industrial furnace.
Brite Wire Resistance Heating
Classification & Property of Brite Wire Resistance Heating
Classification
Brite Wires
21/4R
Brite Wires
25/5A
Brite Wires
60 /16
Brite Wires
80 /20
Nominal Composition %
Cr-
19.0-21.0
22.0-26.0
15.018.0
19.0-22.0
Al-
3.0-4.5
4.0-26.0
-
-
Fe-
Rest
Rest
Rest
-
Ni-
-
-
60
Rest
1100
1300
1150
1200
Melting Point 0C
1500
1500
1390
1400
Resistivity at 200C (Qmm2/m)
1.23#0.08
1.42#0.08
1.12#0.08
1.09#0.08
Density (g/cm3)
7.35
7.10
8.20
8.40
Elongation%
>12
>12
>20
>20
Coefficent of Linear expansion (OX10-6/0C
13.5
16.0
17.0
18.0
Thermal conductivity(KJ/m.h0C)
46.9
46.1
45.2
60.3
Tensile stregth MPa
600-700
630-780
700-850
700-900
Magnetic properties
Magnetic
Magnetic
Slightly
Magnetic
Non
Magnetic
Micrographics stucture
Ferrite
Ferrite
Austenitic
Austenitic
BRITE WIRE 21/4R
BRITE WIRE 21/4R
This is a FeCrAI wire which is recommended for use at temperature up to 1100ºC , it has good life performance and low cost,typical application in heating elements for domestic appliances.
TEMPERATURE RESISTANCE FACTOR
TEMPERATURE RESISTANCE FACTOR
wires
20*C
100*C
200*C
300*C
400*C
500*C
600*C
Brite
Wires
21/4R
1.000
1.011
1.025
1.042
1.061
1.085
1.120
Brite
Wires
25/5A
1.000
1.002
1.005
1.008
1.013
1.021
1.030
Brite
Wires
60/16
1.000
1.012
1.022
1.046
1.064
1.082
1.092
Brite
Wires
80/20
1.000
1.006
1.015
1.028
1.045
1.065
1.068
Brite
Wires
700*C
800*C
900*C
1000*C
1100*C
1200*C
1300*C
Brite
Wires 21/4R
1.142
1.154
1.172
1.180
1.186
Brite
Wires
25/5A
1.038
1.038
1.042
1.044
1.046
1.047
1.050
Brite
Wires
60/16
1.100
1.107
1.114
1.123
1.132
Brite
Wires
80/20
1.057
1.051
1.052
1.062
1.071
1.080
RESISTANCE TOLERANCES
RESISTANCE TOLERANCES
Standard resistance tolerance for wire is as per the following table, Wire can be supplied to closer tolerance on demand.